Someone talked to me about this amazing and very inspirational short film.
Really well done and in the same style as “I Like You”.
--- Spanish version ---
Alguien me habló sobre este increíble e inspirador cortometraje.
Realmente bien hecho y (ojalá) muy en el estilo de I Like You.
2010-07-13
2010-07-11
Adding snow to Prop Stove.
It snowed in the location.
Because of that this prop has a bit of snow over it.
--- Spanish version ---
Está nevado en esta localización.
Por ello, este prop tiene un poco de nieve por encima.
Because of that this prop has a bit of snow over it.
--- Spanish version ---
Está nevado en esta localización.
Por ello, este prop tiene un poco de nieve por encima.
Click images to enlarge.
2010-07-03
Neutral lighting set.
Finally I solved some issues in the lighting set that we will use to test shaders and textures and of course to show the modeling of the props and characters -in a clay way-.
Now it seems to be working fine for us.
--- Spanish version ---
Finalmente he resuelto algunos problemas que tenía el set de luces que usaremos en la producción del cortometraje para probar shaders y texturas, y porsupuesto también para probar el modelado de props y personajes -in a clay way-.
Now it seems to be working fine for us.
--- Spanish version ---
Finalmente he resuelto algunos problemas que tenía el set de luces que usaremos en la producción del cortometraje para probar shaders y texturas, y porsupuesto también para probar el modelado de props y personajes -in a clay way-.
Click images to enlarge.
2010-07-01
Finishing Prop Stove.
Today I have had the time to finish modeling the prop Stove. The backside of the model doesn’t appear to the camera and indeed is not to very detailed.
At the same time I also created a simple lighting set with clay material just to test and show the volume of the models.
Find below some pictures and turn around.
--- Spanish version ---
Hoy he sacado algo de tiempo para terminar el modelado del prop Stove. La parte de atrás no aparece en cámara, así que no necesita mucho más detalle.
Al mismo tiempo, también he creado un set de luces muy sencillo con un clay material, sólo para testear el volumen y la escala de los modelos.
At the same time I also created a simple lighting set with clay material just to test and show the volume of the models.
Find below some pictures and turn around.
--- Spanish version ---
Hoy he sacado algo de tiempo para terminar el modelado del prop Stove. La parte de atrás no aparece en cámara, así que no necesita mucho más detalle.
Al mismo tiempo, también he creado un set de luces muy sencillo con un clay material, sólo para testear el volumen y la escala de los modelos.
Click images to enlarge.
Props modeling pipeline.
Click image to enlarge.
01 - Concept art
The modeler gets the art or the main reference given from the Art Department or from the artists.
In this phase are already detailed the main volums of the prop to be modeled, the scale and the style.
02 - References
The modeler is in charge of searching different references related to the prop to be modeled. It could be photographies of real objects searched on the internet, photos taken by the modeler himself, references from other movies, etc.
The ideal scenario is having a good set of references, around ten would be a good number.
03 - Material properties
Evaluate a bit the materials of which the prop to be modelled is made: metal, plastic, paper, etc.
The model has to give the sensation of heaviness, lightness, emptyness or solidness. Obviously, this task will help a lot the shading and the textures, but should be considered from the very start when modelling.
04 - Visual detail
Focus on the small details that distinguish a prop from another. Details always make a difference. For example, when modelling a cable, it being peeled or cut.
05 - Plasticine
Model a plasticine in low resolution with the final volums of the prop. The responsible should approve this task before moving on tothe next step.
06 - Polygonal modelling
Model the prop using polys in a traditional way. Use the lowest resolution available and add two smooth subdivisions most.
07 - Sculpting
If the prop requires it, move on to Mudbox to add small details. Volums will never be created in this step.
08 - Clay renders
Using the appropiate set of lights, create various clay renders with the goal of showing the final model to the supervisor.
09 - Turn around
If necessary, create a turn around using the same lighting set worn for the clay renders.
10 - Director revision
The Director supervises the prop model to make decisions about possible changes or approval.
11 - Approval
The Director approves the modelling work.
12 - Retake
The Director suggests changes in the modelling job.
13 - Shading&Texturing department
Job finished and moved on to the next department.
14 - Back to step 06
If the Director suggests changes, go back to step 6 of the process.
--- Spanish version ---
01 - Concept art
El modelador coge el arte y la referencia principal dada por el departamento de arte.
En este momento, debería de quedar claro el detalle de los volúmenes, la escala y el estilo.
02 - References
El modelador se encarga de buscar diferentes referencia relacionadas con el prop. Pueden ser fotografías de objetos reales buscadas en internet, fotografías tomadas por el propio modelador, referencias de otras películas, etc.
La situación ideal es tener un buen set de referencias. No menos que cincuenta.
03 - Material properties
Es necesario hacer una evaluación de los materiales de los que está construído el prop: metal, plástico, papel, etc.
El modelo tiene que dar la sensación de peso, ligereza, solidez, etc. Obviamente, a este propósito ayudará bastante el trabajo de shaders y texturas, pero debería ser considerado desde la primera fase de modelado.
04 - Visual detail
Hay que poner especial atención en los pequeños detalles que distinguen a un prop de otro. Los detalles siempre marcan la diferencia. Por ejemplo, cuando modelamos un cable, puede estar pelado o cortado.
05 - Plasticine
Es necesario modelar una plastilina en baja resolución que contenga los volúmenes finales del prop. El responsable debería aprobar esta tarea antes de continuar con el siguiente paso.
06 - Polygonal modelling
En este paso se modela el prop utilizando modelado poligonal clásico. Hay que utilizar el menos número de polígonos posible y nunca más de dos subdivisiones.
07 - Sculpting
Si el prop lo requiere así, el modelo se lleva a Mudbox para añadir pequeños detalles. Los volúmenes nunca se crearán en este paso.
08 - Clay renders
Utilizando el set de luces apropiado para ello, se crean varios renders mostrando el modelado final al supervisor.
09 - Turn around
Si fuera necesario, crear un turn around utilizando el mismo set de luces del paso anterior.
10 - Director revision
El director supervisa el trabajo de modelado y toma una decisión sobre posibles cambios, o finalmente aprueba el trabajo.
11 - Approval
El director aprueba el trabajo de modelado.
12 - Retake
El director sugiere cambios en el trabajo de modelado.
13 - Shading&Texturing department
Trabajo de modelado finalizado. Se pasa el prop al siguiente departamento.
14 - Back to step 06
Si el director sugiere cambios, se retrocede al paso 06.
2010-06-07
Introduction to naming convention.
Along all the productions I’ve worked, I realized how important the organization of files and folder is as well as naming them.
Each studio, each production company use a different naming criteria, generally, the bigger the company, the more complex this system is.
For this project we are trying to create an organization and folder naming system that is not very complex but enough ellaborated.
We are still working things out here but I’ll leave you with some of our first steps.
This document will be updated along the way. Right now we’re just in the draft, modelling, mapping, shading, texturing and pre-lighting phase.
Work in progress files
Prp_propname_category_wip_xxx.scn
Example: Prp_stove_mesh_wip_001.scn
Categories:
Prp_propname_category_v_xxx.scn
Example: Prp_stove_mesh_v_001.scn
Categories:
We’ve also talked about naming convention for texture maps.
Prp_propName_propPart_mapClass_size.tif
Prp_stove_mainBody_diffuse_4k.tiff
Map categories:
Best regards.
--- Spanish version ---
A lo largo de todas las producciones en las que he trabajado, me he dado cuenta de cuan importante es la organización de archivos y carpetas, así como la nomenclatura de las mismas.
Cada estudio, cada compañía, usa un sistema diferente, generalmente, cuanto más grande es el estudio más complejo y elaborado es su sistema.
Para este proyecto estamos intentando crear un sistemas de nomenclatura que no sea muy complejo, pero si lo suficientemente elaborado.
Todavía estamos trabajando en ello, pero aquí os dejo algunas de las primeras ideas.
Este documento seguirá actualizándose. De momento solo comprende las fases de layout modeling, modeling, mapping, shading, texturing y pre-lighting.
Archivos en progreso
Prp_propname_category_wip_xxx.scn
Example: Prp_stove_mesh_wip_001.scn
Categories:
Prp_propname_category_v_xxx.scn
Example: Prp_stove_mesh_v_001.scn
Categories:
Prp_propName_propPart_mapClass_size.tif
Prp_stove_mainBody_diffuse_4k.tiff
Map categories:
Saludos!
Each studio, each production company use a different naming criteria, generally, the bigger the company, the more complex this system is.
For this project we are trying to create an organization and folder naming system that is not very complex but enough ellaborated.
We are still working things out here but I’ll leave you with some of our first steps.
This document will be updated along the way. Right now we’re just in the draft, modelling, mapping, shading, texturing and pre-lighting phase.
Work in progress files
Prp_propname_category_wip_xxx.scn
Example: Prp_stove_mesh_wip_001.scn
Categories:
- Draft
- Mesh
- Mapping
- Shading
- Bake
- Rig
- Pre-lighting
Prp_propname_category_v_xxx.scn
Example: Prp_stove_mesh_v_001.scn
Categories:
- Draft
- Mesh
- Mapping
- Shading
- Bake
- Rig
- Pre-lighting
We’ve also talked about naming convention for texture maps.
Prp_propName_propPart_mapClass_size.tif
Prp_stove_mainBody_diffuse_4k.tiff
Map categories:
- Diffuse
- Specular
- Reflection
- Opacity
- Bump
- Normal
- Mask
- Displacement
- Emission
- SSS
- 512 = Real time
- 1k = Low resolution
- 2k = Medium resolution
- 4k = High resolution
- 8k = Super high resolution
- xk = Special resolution
- Dirt map
- Noisy dirtmap (or rust map)
- Dust map
- Undercoat map
Best regards.
--- Spanish version ---
A lo largo de todas las producciones en las que he trabajado, me he dado cuenta de cuan importante es la organización de archivos y carpetas, así como la nomenclatura de las mismas.
Cada estudio, cada compañía, usa un sistema diferente, generalmente, cuanto más grande es el estudio más complejo y elaborado es su sistema.
Para este proyecto estamos intentando crear un sistemas de nomenclatura que no sea muy complejo, pero si lo suficientemente elaborado.
Todavía estamos trabajando en ello, pero aquí os dejo algunas de las primeras ideas.
Este documento seguirá actualizándose. De momento solo comprende las fases de layout modeling, modeling, mapping, shading, texturing y pre-lighting.
Archivos en progreso
Prp_propname_category_wip_xxx.scn
Example: Prp_stove_mesh_wip_001.scn
Categories:
- Draft
- Mesh
- Mapping
- Shading
- Bake
- Rig
- Pre-lighting
Prp_propname_category_v_xxx.scn
Example: Prp_stove_mesh_v_001.scn
Categories:
- Draft
- Mesh
- Mapping
- Shading
- Bake
- Rig
- Pre-lighting
Prp_propName_propPart_mapClass_size.tif
Prp_stove_mainBody_diffuse_4k.tiff
Map categories:
- Diffuse
- Specular
- Reflection
- Opacity
- Bump
- Normal
- Mask
- Displacement
- Emission
- SSS
- 512 = Real time
- 1k = Low resolution
- 2k = Medium resolution
- 4k = High resolution
- 8k = Super high resolution
- xk = Special resolution
- Dirt map
- Noisy dirtmap (or rust map)
- Dust map
- Undercoat map
Saludos!
2010-06-02
Our first modeling test.
I have started to do the first aesthetics test with the 3D models. Sometimes it’s very difficult to convert the 2D concepts into 3D models.
This is one of the first simple modelling tests of one of the props that could be in the promotional video. The styles are not completely defined, but more or less we have established a path to follow.
Soon I will show some shading and texturing tests.
As you may know, we are still working on the pipeline and workflow and we haven’t made a decision about the 3D software. These first tests were made with Softimage.
Please, feel free to talk with us about the design and style.
--- Spanish version ---
He empezado a realizar algunas pruebas de estilo con modelos 3D. Algunas veces resulta bastante complicado convertir los diseños 2D en modelos 3D.
Este es uno de los primeros test de modelado de uno de los props que podrían aparecer en el video promocional del cortometraje. Es estilo no está completamente definido, pero más o menos ya estamos estableciendo un camino a seguir.
Como sabes, todavía estamos trabajando en el pipeline y en nuestro sistema de trabajo, así que todavía no hemos tomado una decisión sobre que paquete de 3D vamos a utilizar. Estos test se han hecho con Softimage.
Siéntete libre para comentar con nosotros cualquier cosa.
This is one of the first simple modelling tests of one of the props that could be in the promotional video. The styles are not completely defined, but more or less we have established a path to follow.
Soon I will show some shading and texturing tests.
As you may know, we are still working on the pipeline and workflow and we haven’t made a decision about the 3D software. These first tests were made with Softimage.
Please, feel free to talk with us about the design and style.
--- Spanish version ---
He empezado a realizar algunas pruebas de estilo con modelos 3D. Algunas veces resulta bastante complicado convertir los diseños 2D en modelos 3D.
Este es uno de los primeros test de modelado de uno de los props que podrían aparecer en el video promocional del cortometraje. Es estilo no está completamente definido, pero más o menos ya estamos estableciendo un camino a seguir.
Como sabes, todavía estamos trabajando en el pipeline y en nuestro sistema de trabajo, así que todavía no hemos tomado una decisión sobre que paquete de 3D vamos a utilizar. Estos test se han hecho con Softimage.
Siéntete libre para comentar con nosotros cualquier cosa.
Click images to enlarge.
Subscribe to:
Posts (Atom)












